Full Body Harnesses

Full Body Harnesses
A Full body Harness providing basic fall protection.

For further information please fill in the form below or call our sales team on 01375 366888.

RGH1
Rear D Harness.

  • The RGH1 harness is a basic access harness fitted with a rear dee only.
    This harness is used primarily with a fall arrest lanyard (I.e. RGL1), to provide an operative with basic fall protection.
  • When used in conjunction with a ” twin leg lanyard” (RGL3), the harness can be used for tower climbing, scaffold and general steel erecting, as the twin leg lanyard would provide continuous attachment through “double clipping”.
  • As with all of the RidgeGear harnesses, the RGH1 is suitable for use with fall arrest blocks, however we recommend the addition of the RGL4 extension strop to facilitate easy connection.
  • The harness is fully adjustable and is fitted with rip stitch indicators.

For further information please call our sales team on 01375 366888.



RGH2

Front & Rear D Harness.

The RGH2 harness is the “ Workhorse ” of the industry.

  • The harness is fitted with a rear dee and a chest mounted front dee.
  • It can be used similar to the RGH1, but has the added feature of the front dee ring to extend the working capability of the harness.
  • Utilising the front dee, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane.
  • A variety of other devices can be used with the front dee ring, but please check for suitability.
  • The harness is fully adjustable and is fitted with rip stitch indicators.
  • The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

For further information please call our sales team on 01375 366888.


RGH3

Rear & Side D Harness.

The RGH3 combines the basic fall arrest harness with a comfortable work-positioning belt in one unit.

  • The harness is fitted with a rear dee and two side dee rings mounted to the belt and can be used similar to the RGH1.
  • When fitted with a pole/work-positioning belt (RGP1&2), the harness can be used for pole climbing or work-positioning on open structures.
  • In certain circumstances, the side dee’s on the RGH3 can be used for work restraint in the horizontal plane.
  • The wide belt fitted to the RGH3 is comfortable and provides lumbar support to the operative, with three gear loops fitted for carrying tools, leaving the hands free thus maintaining the required three points of contact when climbing.
  • The harness is fully adjustable and is fitted with rip stitch indicators.

For further information please call our sales team on 01375 366888.


RGH4

Front, Rear & Side D Harness.

The RGH4 includes all of the features of the RGH1-3 harnesses.

This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas.

  • The RGH4 is a “multi task” harness and will allow operatives to access almost any area in safety using a combination of all the RidgeGear products available.
  • As with the RGH2, this harness is suitable for use in performing rescues from height using the RGR4 rope rescue kit.
  • As with the RGA3, the wide belt fitted to the RGH4 is comfortable and provides lumbar support to the operative and is fitted with three gear loops for carrying tools, leaving the hands free thus maintaining the required three points of contact when climbing.
  • All of the features, combined with a good load bearing capacity, make this harness the ideal choice for the professional.
  • The harness is fully adjustable and is fitted with rip stitch indicators.
  • The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

For further information please call our sales team on 01375 366888.



RGH5

Front & Rear D Rescue Harness.

The RGH5 is designed for use as a confined access harness.

  • The front and rear attachment points can be used as standard fall arrest points and the rescue strap can be used for lifting and lowering. When used, the rescue strap keeps the operative in a near vertical position, which is preferred when recovering an unconscious casualty.
  • This harness is used throughout the industry in conjunction with a tripod (RGR1) and a winch unit to access confined spaces, vertical shafts, sewers and silos.
  • As with all of the RidgeGear harnesses, the RGH5 is suitable for use with fall arrest/recovery blocks.
  • The harness is fully adjustable and is fitted with rip stitch indicators.

For further information please call our sales team on 01375 366888.



RGH9

Front & Rear D Elasticated Harness.

With the introduction of elasticated webbing on the leg & lower chest straps, the RGH9 harness provides additional comfort and support during use.

  • Based on the RGH2, the RGH9 is also fitted with a rear dee and a chest mounted front dee.
  • This harness can be used similar to the RGH1, but has the added feature of the front dee ring to extend the working capability of the harness.
  • Utilizing the front dee, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents, or similarly when restraint/work-positioning is needed in either the vertical or horizontal plane.
  • A variety of other devices can be used with the front dee ring, but please check for suitability.
  • In addition to the elasticated feature, the harness is fully adjustable and fitted with rip stitch indicators.
  • The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied to the front dee ring.

For further information please call our sales team on 01375 366888.



RGH11

Front, Rear & Side D Utility Harness.

A multi purpose harness for most applications, having front and rear ‘D’s for fall arrest and rescue and work positioning side ‘D’s allowing for hands free working.

  • New design of front chest ‘D’ mounted on O rings eliminates webbing stress areas and even distribution of forces in the event of a fall.
  • Annoying webbing tails are eliminated from the front of the harness.
  • Curved stainless steel leg adjusters provide fast and effective non slip adjustment.
  • Specially angled 75mm wide sit strap provides added comfort in the event of a fall or during rescue.
  • Velcro shoulder pads allow for temporary attachment of lanyard and pole strap during climbing.
  • Water repellent webbing highly resistant to water, oil, dirt & grease stains.
  • Tightly woven construction for added abrasion resistance.
  • Colour coordinated straps to ensure fast and correct fitting of leg straps.
  • Twin layer moulded water repellent back pad support, incorporating internal cushioning and ribbing for extra comfort and sturdy spinal support.
  • Back pad high visibility reflecting strip.
  • Extra cross bar on side ‘D’s ensures ‘D’ remains stationary and outwardly cranked to provide simple and effective one handed hook attachment.
  • Additional label sewn to waist strap to allow for entering user details.
  • Lightweight.
  • Fully approved, trialled and used extensively by major utility companies.

For further information please call our sales team on 01375 366888.



RGH12

Fast Fit Harness.

The RGH12 has been developed in conjunction with the Fire Service, the speed and simplicity of assembly and adjustment makes this harness the ideal solution where rapid and simplistic donning is crucial.

  • The waist and leg straps comprise of “quick click” snap to buckles, which cannot be incorrectly assembled, and pulling down on the webbing tails easily tightens the front shoulder and chest straps.
  • The additional waist strap and extra wide sit strap, provide added support and comfort during use and also whilst in suspension.
  • Pressure is also eased from the legs with the presence of leg comfort pads.
  • The harness comprises front and rear “D” rings for the purpose of fall arrest, and provides the perfect solution where speed and extra comfort is preferred.

For further information please call our sales team on 01375 366888.



RGH14

Adventure Harness.

The Adventure harness RGH14 has been specifically designed to cater for a wide age and size variance

  • The sizes range from Age 6 through to adult.
  • Due to the nature of adventure centres it is normal for users to only be wearing light clothing such as “T” Shirts, with this in mind we “hand build” every harness concentrating on all the connection point to ensure they are all totally smooth.
  • We have specially designed the harness to ensure that once it has been donned it is difficult to take off unless assisted by an instructor.

For further information please call our sales team on 01375 366888.



RGH16

Multi Task Comfort Harness.

The RGH16 is a “multi task” harness and will allow operatives to access almost any area in safety using a combination of the RidgeGear products available.

  • For fall arrest the harness comprises front and rear D rings, with 2 side work positioning D rings on a comfortable support pad and a further ventral front D ring positioned at the waist for sit suspension and / or work positioning.
  • This comfortable harness is designed for operatives who spend long hours working at height and in exposed areas.
  • The belt is also fitted with three gear loops for carrying tools leaving the hands free thus maintaining the required three points of contact when climbing.
  • All of the features, combined with a good load bearing capacity, make this harness the ideal choice for the professional.
  • The harness is fully adjustable and can be quickly and easily adjusted to fit the wearer.
  • The position of the waist comfort pad can be adjusted to give optimum comfort.
  • Leg straps are opened using lightweight adjustable “quick click” buckles, which allow for easy and quick step-in facility.
  • Comfort leg pads are also provided.

For further information please call our sales team on 01375 366888.



RGH31

Economy Harness Rear Single “D”.

This RGH31 is another single point entry level harness developed for the user who requires a harness for a possible one off use or that the environment is particularly harsh requiring the harness to be replaced on a more frequent basis.

  • This harness does not have fall indicators and uses a more economic connection system.
  • Still manufactured to our extremely high standards for both quality and testing.
  • The harness has adjustment on the shoulder straps and the leg straps.

For further information please call our sales team on 01375 366888.



RGH32

Economy Harness Front and Rear “D”.

The RGH32 is a budget harness although still manufactured to very high standards, but does not have fall indicators and uses a more economic connection system.

  • The front attachment is by means of webbing loops as illustrated in the image.
  • This harness can be used similar to the RGH1 but has the added feature of the front attachment point to extend the working capability of the harness.
  • Utilising the front attachment point, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane.
  • A variety of other devices can be used with the front D ring, but please check for suitability.
  • The harness is fully adjustable and is fitted with rip stitch indicators.
  • The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

For further information please call our sales team on 01375 366888.