CLOSE

Lifting Equipment Hire & Testing

Work Positioning

Work Positioning

Our stock of restraint belts are available with rope, wire and webbing pole straps to suit your work requirements.

For further information please fill in the form below or call our sales team on 01375 366888.

RGB1
RGB1

Twin D Restraint Belt.

Traditionally  the RGB1 has been used by loading crews at docks, on ships, and container handling areas, however it has more recently been used to access and perform roof maintenance, where the restraint system prevents the user from stepping over an exposed edge and there is no other fall hazard.

  • The RGB1 is a work positioning/restraint belt.
  • Fitted with two side mounted dee rings for ease of attachment.
  • Back pad provides some lumber support.
  • The RGB1 is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGB2
RGB2

Twin D Restraint Belt.

The RGB2 is essentially an RGB1 with alternative buckle and gear loops fitted.

  • A work positioning/restraint belt  
  • Fitted with two side mounted dee rings for ease of attachment.
  • Back pad provides some lumber support and comfort, especially when tools are hung from the belt loops.
  • As with the RGB1, the RGB2 is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system.
  • The uses for this restraint belt are similar to the RGB1, however to prevent the user from dropping tools from height, all tools can be secured to the gear loops by a cord lanyard and clipped to the belt when not in use.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGBE-TA
RGBE-TA

4 Point Work Positioning Belt.

The RGBE-TA is similar to the RGBE but has the added advantage of 4 attachment restraint loops.

  • The belt is supplied with a padded back support.
  • The RGBE-TA is a work positioning / restraint belt.
  • As with the RGB1&2, the RGBE-TA is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system.
  • It is important that a client understands the difference between fall arrest and restraint before using this item.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGBE
RGBE

Single D Restraint Belt.

The RGBE is an export version of the RGB1, fitted with only one dee ring attachment mounted at the rear.

  • Standard padded back support.
  • The RGBE is a work positioning/restraint belt.
  •  
  • As with the RGB1&2, the RGBE is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system.
  • The uses for this restraint belt are similar to the RGB1.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGB180BT
RGB180BT

Restraint Belt with Integral Pole Strap.

The RGB180BT is a work positioning belt.

  • This belt is fitted with an integral work positioning strap that can be passed around a pole or similar structure and clipped back onto the remaining side D ring.
  • The WP strap is fully adjustable and is fitted with an anti abrasion wear pad and double action safety snap hook.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGP1
RGP1

Rope Pole Strap.

The RGP1 is a pole strap/work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt.

  • The adjuster is easy to use “one handed” either under tension or not.
  • The 16mm hard lay rope is additionally protected by a cordura sleeve in the work area, to offer some protection against abrasion and extend the life of the product.
  • The 2m length of the RGP1 allows the user enough freedom of movement, without being exposed to a fall.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGP2
RGP2

Webbing Pole Strap with Stainless Steel Buckles.

The RGP2 is a pole strap/ work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt.

  • The adjuster is easy to use “one handed” either under tension or not.
  • The 45mm webbing, is protected by a wide pad in the work area, to offer some protection against abrasion and extend the life of the product.
  • The 1.4mtr length of the RGP2 allows the user enough freedom of movement, without being exposed to a fall.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGP3
RGP3

Work Positioning Polestrap Steel Fittings.

The RGP3 is primarily used for pole climbing, but can also be pressed into service for mast climbing, maintenance and general work on open steel structures.

  • The RGP3 economy is a pole strap / work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt.
  • The adjuster is easy to use “one handed” either under tension or not.
  • The 45mm webbing, is protected by a wide pad in the work area, to offer some protection against abrasion and extend the life of the product.
  • The 1.4mtr length of the RGP3 allows the user enough freedom of movement, without being exposed to a fall.
  • When used for pole climbing, additional equipment should be used to prevent falls whilst moving.
  • When the RGP3 is attached, the operative can then use both hands to perform tasks whilst in a safe and comfortable position.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGP4
RGP4

Wire Pole Strap.

The RGP4 is a multi purpose work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt or used independently and can be supplied in a variety of lengths.

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



RGP11
RGP11

Webbing Pole Strap.

The RGP11 webbing pole strap has a specially designed controlled release adjuster buckle to ensure safe operation and adjustment.

  • Double layer abrasion pad protects the strap from damage
  • Karabiner connected to nylon thimble for ease of operation
  • Velcro pad sewn to abrasion pad loop to allow for temporary attachment of pole strap to harness during climbing
  • Velcro strap sewn to hand hold provides a safe means of retaining loose ends
  • Additional label sewn inside a pocket to allow for entering user details
  • Twisted snap hook and 2 part triangle/karabiner ensures flat surface contact with pole
  • 40mm sliding loop keeps the straps level and reduces the risk of premature webbing wear through the buckle
  • Available with different hook/karabiner options as required
  • Fully approved, trialled and used extensively by major utility companies

For further information please click the 'enquire' button below and fill out the form or call us on 01375 366888.



From the Blog
John F Hunt Environmental Monitoring Developments
Creating Partnerships John F Hunt Ltd, the holding company of the John F Hunt Group are pleased to announce it has acquired a majority stake in Asbestos Consultants Europe Limited (ACE), formally trading as ACEPSI, specialists in all asbestos related areas...
Read More
Silent Generator Hire
John F Hunt offers Super Silent Generators from 10Kva to 1250Kva for hire. Our range of generators have been carefully selected to meet the demands of any project where temporary power is required. With an increasing client base across the UK’s most...
Read More
Thameside Lifting Question? ...Ask Us
Do you have a question that is specific to this sector, please feel free to get in touch via this form.